If you have a chest freezer cold plunge, one of the best pieces of equipment you can buy is a temperature controller.

InkBirds makes one that is affordable and reliable. The device is not difficult to program, but the instructions can be a bit confusing.

This video will walk you through how to program the device using the buttons on the controller as well as with the app on a smart phone.

If you want to purchase an InkBird temperature controller, please consider using my Amazon Affiliate link:

NOTE: At 6:55 into the video after I finish programming the device and press the set button, the target temperature (SV) shows 77F instead of 55F.

This is a mistake in the video editing! The unit actually *did* change to 55F – see 8:35 in the video).

A gold star goes to Jimmy Griffin for noticing this detail and pointing it out.

Join my free Facebook group here:

You can find other helpful items on my website, including my book “The Ultimate Chest Freezer Cold Plunge DIY Guide.”

Subscribe to Channel:

This video by John Richter – Chest Freezer Cold Plunge was liked: 184 times

If you like this video by John Richter – Chest Freezer Cold Plunge, please support their CHANNEL by clicking on the SOURCE link below and Subscribe.

SOURCE

————————————–

Featuring Your Videos:

By featuring your videos on our blog, your videos will receive hundreds of views daily from our website visitors, you get a backlink to your channel for followers to subscribe to your channel. This is a win/win for SEO for both of us. If you would like your videos or channel highlighted and premiered on our blog for FREE, please contact us.

However, if you no longer want us to premier your channel, and want us to remove your video and not feature your channel anymore, please contact us.

Video Post Disclaimer:

The information contained in the multimedia content (“Video Content”) or post content in general, represents the views and opinions of the original creators of such Video Content or post, and does not necessarily represent the views or opinions of KASRefrigeration.com. The mere appearance of Video Content or the post on the Site does not constitute an endorsement by KASRefrigeration.com or its affiliates of such Video or Post Content. 

The Video Content or Post has been made available for informational and educational purposes only. KASRefrigeration.com does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the Video or Post Content. KASRefrigeration.com does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any Video Content or Post.

Affiliate Disclosure:

This post and description may also contain some affiliate links, which means that the post creator may receive a small commission at no extra cost to you if you click on some of the product links and decide to make a purchase. This channel is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Copyright Issue:

If you find any of your copyrighted material in this post or video, please contact us, so we can resolve the issue.

All rights reserved by respective owners.

19 thoughts on “How to Program an InkBird Temperature Controller for a Chest Freezer Cold Plunge

  1. greatymmij says:

    I have my ts at 1 degrees C and Cd at 5.5 degrees C. I have my alarms set very high and low, so it never goes off. However, whenever the temperature is outside the cold range, it makes 2 beep noises. This happens several times a day. How do I prevent it from making the 2 beep noises?

  2. lynda Darnell says:

    love this very helpful…but I m having an issue…have fan plugged in but when temp goes over set limit it doesn't t come on…the fan only has a 2 prong plug but main unit is 3 prong..could that be the problem? fan works in regular outlet…please help

  3. Crypto Safely says:

    Would love a video on the marineland filter from your book. I have everything set up except for that. I can’t find anything about whether to use the 3 stage filtration or the polisher. Also can’t find how long to run each day.

Leave a Reply

Your email address will not be published. Required fields are marked *